Saturday, June 25, 2016

ANOTHER PROJECT CLOSER TO WORKING ON THE FIERO

The rear platform flap that had the bent hinge finally arrived from Germany and just like the picture on EBAY, included the flap, hinge and little strip, not just the flap that the part number indicated. After installing it, the top went up and down, with no oil leakage on the cylinders and while waiting for all of the parts to arrive, actually was able to get a wax job on the whole car. So the Mercedes SLK230 is back on the road and the garage is ready for the next project!


SLK230

Next up is to paint the top and hood on the Chevy Cavalier, so it can be sold. Just too many cars and trucks sitting around so after the paint touch up, hopefully there will be one less. The garage was hosed down to get rid of as much dust and cobwebs as possible and a filter was put in one window and a fan in the other. With a HVLP spray gun and the fan, there really isn't that much over spray when painting. Plastic sheet will still be hung to make sure no over spray gets on the tool box and items on the shelves.




EXHAUST FAN


OUTSIDE AIR FILTER


With any luck, I should be back on the Fiero by the middle of July.

Until next time,

Randy
Post a Comment